To maintain your monobloc reinforced concrete swimming pool and keep all its watertightness, you have probably put your pool in winter. The good days come back and you are now looking forward to swimming? Check out Leader Pool tips to prepare your pool for the summer.
Clean your one-piece reinforced concrete pool with ease
Leader Pool builds monobloc reinforced concrete pools near Nice, Cannes or Nîmes. This unique process developed is very easy to maintain. When the bathing season arrives, proper cleaning and treatment will get your pool up and running quickly. Start by removing equipment used during winter storage (tarpaulin), clean and store in a dry and sheltered place.
You can then start a complete cleaning of your pool. Filters, pumps and skimmers then do a lot of the work. But for perfect water, you can also use a dip net to remove as much dirt and leaves as possible. It must then be ensured that the water line and the walls are well cleaned using a suitable brush. Then leave the filters running continuously for a few days (24 to 48 hours is enough if you have done the wintering).
Treat your pool for clean, clear water
Once your pool is thoroughly cleaned, you must focus on the pond water. The first step is to bring the water up to level. If necessary, fill your pelvis to reach an optimal level: between half and 3/4 of the skimmers. You can use tap water or even rainwater according to specific rules.
pH and chlorine
Measure the pH level of your pool. Depending on the results, you will need to treat pond water with suitable products. Apply these patching products when the pool is in filtration. If the water has an abnormal color (green or white), add blocks of chlorine, salt or bromine to get rid of bacteria and algae effectively.
All you have to do is wait until the water reaches the ideal temperature for swimming: between 27 and 29 ° C! The bravest will benefit from 23 ° C.